Documentation
Resources
WristOx2® 3150 with Bluetooth® Low Energy Specifications
Oxygen Saturation Display Range: 0% to 100% SpO2
Pulse Rate Display Range: 18 to 321 beats per minute (BPM)
Displays:
Numeric: 3-digit LCD
Pulse Strength: Pulse Strength Bar Graph
Accuracy – Sensors: Declared accuracy data for compatible sensors can be found in Nonin’s Sensor Accuracy document.
Measurement Wavelengths and Output Power**:
Red: 660 nanometers @ 0.8 mW maximum average
Infrared: 910 nanometers @ 1.2 mW maximum average
** This information is especially useful for clinicians performing photodynamic therapy.
Temperature:
Operating: -5 °C to 40 °C (23 °F to 104 °F)
Storage/Transportation: -40 °C to 70 °C (40 °F to 158 °F)
Time (from storage) for monitor to be ready for its intended use: 10 minutes to warm from -40 °C to -5 °C
10 minutes to cool from 70 °C to 40 °C
Device temperature will not exceed 41°C as measured during a controlled environment test.
Humidity:
Operating: 10% to 95% non-condensing
Storage/Transportation: 10% to 95% non-condensing
Operating Altitude: Up to 4,000 meters (13,123 feet)
Operating Hyperbaric Pressure: Up to 4 atmospheres
Power Requirements: Two AAA (1.5V) batteries
| Battery Life (expected minimum): NOTE: Based on testing new and fully-charged batteries. See footnotes for brands used. Refer to battery manufacturers’ operator’s manuals for instructions for use. |
Alkaline AAAa) | Rechargeable AAA (700 mAh)b | Rechargeable AAA (1050 mAh)c |
|---|---|---|---|
| Storage: MVI Display Mode off: MVI Display Mode on: |
9 months 25 days |
Not specified | Not specified |
| Operating without Bluetooth Connection, continuous use: | 53 hours | 36 hours | 52 hours |
| Operating with Bluetooth Connection, continuous use: | 44 hours | 24 hours | 31 hours |
Dimensions (without sensor or wristband): 51 mm x 73 mm x 19 mm (H x W x D)
(2.0 in. x 2.9 in. x 0.75 in.)
Weight (with batteries and wristband): 70.0 g (2.5 oz)
Memory:
Type: Non-volatile
Capacity:
up to 1,080 hours (4 sec. data storage rate)
up to 540 hours (2 sec. data storage rate)
up to 270 hours (1 sec. data storage rate)
Classification per ANSI/AAMI ES60601-1 and CAN/CSA-C22.2 No. 60601-1:
Type of Protection: Internally powered (battery power)
Degree of Protection: Type BF-Applied Part
Mode of Operation: Continuous
Enclosure Degree of Ingress Protection: IP33
This product complies with ISO 10993-1, Biological evaluation of medical devices – Part 1: Evaluation
and testing.
a.Batteries used: Harding Alkaline AAA
b.Batteries used: Energizer (MR03) Ni-MH 700mAh Rechargable Batteries 1.2 VDC
c.Batteries used: Ansmann (HR03) Ni-MH 1050 nMh Rechargable Batteries 1.2 VDCOxygen Saturation Display Range: 0% to 100% SpO2
Pulse Rate Display Range: 18 to 321 beats per minute (BPM)
Displays:
Numeric: 3-digit LCD
Pulse Strength: Pulse Strength Bar Graph
Accuracy – Sensors: Declared accuracy data for compatible sensors can be found in Nonin’s Sensor Accuracy document.
Measurement Wavelengths and Output Power**:
Red: 660 nanometers @ 0.8 mW maximum average
Infrared: 910 nanometers @ 1.2 mW maximum average
** This information is especially useful for clinicians performing photodynamic therapy.
Temperature:
Operating: -5 °C to 40 °C (23 °F to 104 °F)
Storage/Transportation: -40 °C to 70 °C (40 °F to 158 °F)
Time (from storage) for monitor to be ready for its intended use: 10 minutes to warm from -40 °C to -5 °C
10 minutes to cool from 70 °C to 40 °C
Device temperature will not exceed 41°C as measured during a controlled environment test.
Humidity:
Operating: 10% to 95% non-condensing
Storage/Transportation: 10% to 95% non-condensing
Operating Altitude: Up to 4,000 meters (13,123 feet)
Operating Hyperbaric Pressure: Up to 4 atmospheres
Power Requirements: Two AAA (1.5V) batteries
| Battery Life (expected minimum): NOTE: Based on testing new and fully-charged batteries. See footnotes for brands used. Refer to battery manufacturers’ operator’s manuals for instructions for use. |
Alkaline AAAa) | Rechargeable AAA (700 mAh)b | Rechargeable AAA (1050 mAh)c |
|---|---|---|---|
| Storage: MVI Display Mode off: MVI Display Mode on: |
9 months 25 days |
Not specified | Not specified |
| Operating without Bluetooth Connection, continuous use: | 53 hours | 36 hours | 52 hours |
| Operating with Bluetooth Connection, continuous use: | 44 hours | 24 hours | 31 hours |
Dimensions (without sensor or wristband): 51 mm x 73 mm x 19 mm (H x W x D)
(2.0 in. x 2.9 in. x 0.75 in.)
Weight (with batteries and wristband): 70.0 g (2.5 oz)
Memory:
Type: Non-volatile
Capacity:
up to 1,080 hours (4 sec. data storage rate)
up to 540 hours (2 sec. data storage rate)
up to 270 hours (1 sec. data storage rate)
Classification per ANSI/AAMI ES60601-1 and CAN/CSA-C22.2 No. 60601-1:
Type of Protection: Internally powered (battery power)
Degree of Protection: Type BF-Applied Part
Mode of Operation: Continuous
Enclosure Degree of Ingress Protection: IP33
This product complies with ISO 10993-1, Biological evaluation of medical devices – Part 1: Evaluation
and testing.
a.Batteries used: Harding Alkaline AAA
b.Batteries used: Energizer (MR03) Ni-MH 700mAh Rechargable Batteries 1.2 VDC
c.Batteries used: Ansmann (HR03) Ni-MH 1050 nMh Rechargable Batteries 1.2 VDC
Nonin
Locations
Nonin Medical Inc
(Global Headquarters)
Address
13700 1st Ave N,
Plymouth, MN 55441
Email
info@nonin.com
Toll Free (USA and Canada)
1.800.356.8874
Phone
1.763.553.9968
Nonin Medical B.V.
(Europe)
Address
Doctor Paul Janssenweg 150
5026 RH Tilburg
Netherlands
Email
info@nonin.com