Documentation
Resources
-
8000AA Reusable Pulse Oximetry Sensors Meet the Challenge in EMS View
-
SpO2 Sensor Most Durable Compared to Envitec, Unimed, and Cables & Sensors Brands View
-
Understanding Accuracy, Bias, and Variability in SpO2 Readings View
-
Accuracy and Superior Performance of PureSAT® and PureLight Oximetry Technologies View
-
Accurate Oximetry Monitoring – See the Technology Difference View
Model 8000A Series Reusable Finger Clip Pulse Oximetry Sensors Specifications
SpO2 Accuracy1, 2:
| Range | Oxygen Saturation (Arms*) (figure A) | Motion Oxygen Saturation(Arms*) (figure B) |
|---|---|---|
| 70 – 100% | ±2 | ±3 |
| 70 – 80% | ±2 | ±3 |
| 80 – 90% | ±2 | ±3 |
| 90 – 100% | ±2 | ±2 |
A
B
8000AA Sensors
SpO2 Low Perfusion Accuracy: 70 to 100% ±2 digits (Arms*)1
Pulse Rate Accuracy: 18 to 300 BPM ±3 digits (Arms*)1
Pulse Rate Low Perfusion Accuracy: 40 to 240 BPM ±3 digits (Arms*)1
Temperature: 3, 4
Operating: -20 °C to 50 °C (-4 °F to 122 °F)
Storage/Transportation: -40 °C to 70 °C (-40 °F to 158 °F)
8000AP Sensors
SpO2 Low Perfusion Accuracy: 70 to 100% ±2 digits (Arms*)1
Pulse Rate Accuracy: 40 to 240 BPM ±3 digits (Arms*)1
Pulse Rate Motion Accuracy: 40 to 250 BPM ±5 digits (Arms*)1
Pulse Rate Low Perfusion Accuracy: 40 to 240 BPM ±3 digits (Arms*)1
Temperature: 3, 4
Operating: -20 °C to 50 °C (-4 °F to 122 °F)
Storage/Transportation: -40 °C to 70 °C (-40 °F to 158 °F)
Humidity: 3, 4
Operating: 10% to 95% non-condensing
Storage/Transportation: 10% to 95% non-condensing
* ±1 Arms encompasses 68% of the population at zero bias.
1 Additional accuracy and performance information can be found in the sensor accuracy document on the operator’s manual CD.
2 Accuracy specifications based on Nonin’s PureSAT® SpO2 technology and PureLight® sensor technology.
3 For combined oximeter/sensor specifications, refer to the applicable oximetry system’s operator’s manual.
4 Range as tested with Nonin’s PureSAT SpO2 technology.
Measurement Wavelengths and Output Power**:
Red: 660 nanometers @ 3 mW nominal
Infrared: 910 nanometers @ 3 mW nominal
** This information is especially useful for clinicians performing photodynamic therapy.
Compliance
This product complies with ISO 10993.
Not made from natural rubber latex.
Nonin
Locations
Nonin Medical Inc
(Global Headquarters)
Address
13700 1st Ave N,
Plymouth, MN 55441
Email
info@nonin.com
Toll Free (USA and Canada)
1.800.356.8874
Phone
1.763.553.9968
Nonin Medical B.V.
(Europe)
Address
Doctor Paul Janssenweg 150
5026 RH Tilburg
Netherlands
Email
info@nonin.com