%COHb Display Range: 0 to 99%
%MetHb Display Range: 0 to 99%
%SpO2 Display Ranges: 0 to 100%
%rSO2 Display Range: 0 to 100%
Pulse Rate Display Range: 18 to 321 beats per minute (BPM)
Sensor Accuracy: Refer to the sensor Instructions for Use (IFU) for accuracy data.
Measurement Wavelengths and Output Powera: Refer to sensor IFU for details.
Memory: Minimum 280 hours
Operating: 0 °C to 40 °C (32 °F to 104 °F)
Transient Operatingb: -20 °C to 50 °C (-4 °F to 122 °F)
Storage/Transportation: -40 °C to 70 °C (-40 °F to +158 °F)
Operating: 15% to 93% noncondensing
Transient Operatingb: 15% to 90% noncondensing
Storage/Transportation: Up to 93% noncondensing
Operating: 0 to 4,000 meters (13,123 feet)
Power Requirements (Mains): 100-240 VAC 50-60 Hz
D-HH Battery: 3.8 volt Li-ion battery, 3600 mAh
SP-BLE Battery: 3.7 volt Li-ion battery, 1260mAh
Battery Capacity*: Approximately 10 hours continuous operation
*From a fully charged new battery measuring SpO2, PR, COHb, and MetHb
Batter Capacity Following Storage:
Standby State for 1 Week: Approximately 4 hours continuous operation*
Off State for 1 Month: Approximately 8 hours continuous operation*
*From a fully charged new battery measuring SpO2, PR, COHb, and MetHb.
D-HH Charging Time*: Approximately 3 hours
SP-BLE Charging Time*: Approximately 9 hours
*From critical battery level
a. This information is especially useful for clinicians performing photodynamic therapy.
b. The system will operate for a minimum of 20 minutes when exposed to the extreme enviromental operating conditions.
D-HH: 97 mm W x 178 mm H x 21 mm D (3.8 in. W x 7.0 in. H x 0.8 in. D)
SP-BLE: 23 mm H x 28 mm W x 89 mm L (0.9 in. H x 1.1 in. W x 3.5 in. L)
D-HH: 330 grams (11.6 ounces)
SP-BLE: 90 grams (3.2 ounces)
D-HH Display, SP-BLE Signal Processor: 2 Years
Battery: 1 Year
Classification per IEC 60601-1 / CAN/CSA-C22.2 No. 601.1 / UL60601-1:
Type of Protection: Internally powered (on battery power). Class II with AC adapter.
Mode of Operation: Continuous
Enclosure Degree of Ingress Protection in Carrying Case:
D-HH, SP-BLE: IP33
Operation: Bluetooth Low Energy
Blutooth Compliance: Version 4.2 or greater
Output Power: <8 dBm
Operating Range: 9.1 meters (30 feet), line-of-sight
Antenna Type: Internal