8000FI and 8000FC Fiber Optic Sensors Specifications

Specifications

SpO₂ Accuracy^{1, 2, 3}:

SpO₂ Low Perfusion Accuracy: 70% to 100% ±2 digits (A_rms*)¹
Pulse Rate Accuracy: 20 to 250 BPM ±3 digits (A_rms*)¹
Pulse Rate Low Perfusion Accuracy: 40 to 240 BPM ±3 digits (A_rms*)¹
Temperature: ^{4, 5}
Operating: 0 °C to 40 °C (32 °F to 104 °F)
Storage/Transportation: -30 °C to 50 °C (-22 °F to 122 °F)
Humidity: ^{4, 5}
Operating: 10% to 95% non-condensing
Storage/Transportation: 10% to 95% non-condensing

^* ±1 A_rms encompasses 68% of the population at zero bias.
¹ Additional accuracy and performance information can be found in the sensor accuracy document on the operator’s manual CD.
² Accuracy testing was performed under no-motion conditions.
³ Accuracy specifications based on Nonin’s PureSAT^® SpO₂ technology and PureLight^® sensor technology.
⁴ For combined oximeter/sensor specifications, refer to the applicable oximetry system’s operator’s manual.
⁵ Range as tested with Nonin’s PureSAT SpO₂ technology.

Measurement Wavelengths and Output Power**

Red: 660 nanometers @ 0.8 mW maximum average
Infrared: 910 nanometers @ 1.2 mW maximum average
** This information is especially useful for clinicians performing photodynamic therapy.

Compliance

This product complies with ISO 10993-1.
Not made with natural rubber latex.

Warranty

The 8000FC/8000FI is warranted for 90 days from delivery.
Nonin reserves the right to make changes and improvements to these instructions and the product it describes at anytime, without notice or obligation.